Aeotec Z-Wave Heavy-Duty Smart Energy Appliance Switch, Gen5 (ZW078-A)
$47.99
Remotely control a heavy-duty wired device and save energy with the Aeotec Z-Wave Heavy Duty Smart Energy Appliance SwitchThis high voltage wired switch adds remote On/Off control to a connected heavy-duty appliance using Z-Wave wireless communications when connected to a compatible Z-Wave hub. The switch can also report energy usage in Watts or KWh to a Z-Wave controller. Energy consumption will be displayed at the controller’s user interface. The Z-Wave Heavy Duty Smart Energy Appliance Switch mounts to a wall and supports loads up to 9600 Watts, resistor loads up to 40 Amps, and AC motor loads up to 5HP. It’s rated for 240VAC, 50/60Hz. In addition to controlling the wired-in load, the switch serves as a Z-Wave repeater, relaying Z-Wave commands to their destinations if the destination is out of reach from the original transmitter. CONTENTS: Heavy Duty Smart Switch Gen5, 8 AWG Wire Terminal, 10 AWG Wire Terminal, Screws, Instruction Manual. NOTE: Must be enrolled into a Z-Wave network controller (sold separately).Features:supports heavy loads up to 40a/9600w/5hp, reports energy usage in watts or kwh, enables z-wave on/off control for a heavy-duty wired load, responds to on/off commands from a z-wave controllerBrand:Aeotecmanufacturer_part_number:aeozw078-a
Reviews
There are no reviews yet.